ZENOBBQ Classic Electric Automatic BBQ Spit Rotisserie Free Length Adjustment Outdoor Cooking Tools Roaster Accessories Grilling

Electric Rotisserie is composed of the following parts:
1 Bracket(Galvanized) 2 Extension rod(430 stainless steel) 3 Rotating rod(430 stainless steel) 4 USB DC motor 5 Fork(430 stainless steel) with thumb screws(430 stainless steel) 6 Nylon Handle
It can be installed on the ovens(BBQ stoves) to automatic rotate roast whole chicken, roast fish, roast vegetables, etc. Quick to install without tools and easy to carry. The length can be adjusted freely within the effective range.

DIMENSION

Supports ovens(BBQ stoves) with inner diameters below 78cm. They all clamping ovens(BBQ stoves) wall thickness are not exceeding 50mm. If you are not sure whether your oven(BBQ stove) is suitable, you can provide a picture of your oven(BBQ stove) inner diameters and wall thickness to the customer service online.

BRACKET

NOTE: The default are V(vertical) brackets.
There are two kinds of brackets: V(vertical) brackets and H(horizontal) brackets and Use V(vertical) brackets by default, If you need H(horizontal) brackets, please contact customer service. All brackets using 2mm thickness stainless steel plates, with three heights, and using thread locking devices.

THREE HEIGHTS

High – Middle – Low

DEFAULT USE THE V(VERTICAL) BRACKET TO INSTALL ON THE OVEN (BBQ STOVE)

NOTE: The oven(BBQ stove) below not included

USE H(HORIZONTAL) BRACKET TO INSTALL ON THE BBQ TABLE (please contact customer service)

NOTE: The BBQ table below not included

Please click on the picture below to refer to the motor installation

Please click the image link below to refer to the installation

NORMAL MISALIGNMENT

NOTE: Thread processing needs to have a certain clearance, so it is difficult to have the same plane after the rod is tightened, and there will be a normal misalignment. At this time, you only need to loosen the rod a little, then put on the fork to the rod after the plane coincides. Tighten the rod after all the food is loaded.

Please click on the picture below to purchase the HANDLE

Please click on the picture below to purchase the GRILL COUNTER BALANCE

Please click on the picture below to purchase the ROTATE ROAST FISH

Please click on the picture below to purchase the FORKS

Please click on the picture below to purchase the ROTATING SKEWERS

Use handle and counter balance together

When using an electric rotating barbecue grill, because the shape of the food is irregular, one side is heavy and the other is light. When the heavier side rotates over the top, the acceleration downward force will be generated due to the principle of free fall, which drives the motor also Rotating together causes the motor to be unstable; when the heavier side rotates through the bottom, because of the lever principle, the motor needs more torque to drive the unbalanced food to rotate normally. If the rated load of the motor is exceeded, the service life of the motor will be affected, and even cause the motor stops working and damages the motor.

Please click on the picture below to purchase the Balanced combination