6 Gang RV Switch Panel LED Light Display Car Boat LED Push Button Switch Panel DC 11V-30V Panel Box Kit Car Electronic Accessory

6 Gang Car Boat LED Push Button Switch Panel DC 11V-30V 6P Electronic Membrane Panel Switch Car Membrane Controller Switch Panel

Feature:
1. Compact Design for Versatile Use: The car boat LED push button switch panel showcases an ultra-compact panel size that is 60% smaller than traditional panels, equipped with LED backlit modules for easy operation in the dark, making it an ideal upgrade for vehicles and marine craft where space is at a premium.
2. Minimal Installation Depth: With the panel box kit, you’ll appreciate the convenience of installation due to its minimal depth requirement and the smallest drilling dimensions of just 13 x 8.5mm, ensuring a clean and unobtrusive fit in any dashboard.
3. Customizable Cable Length: The car LED touch membrane control panel switch employs a compact and easily accessible micro USB cable, allowing end users to replace the cable with any desired length for flexible installation and connectivity.
4. Advanced Protection and Control: Featuring an electronic membrane panel switch that offers IP66 protection against strong water jets, coupled with self-resetting fuses rated at 10A per branch, this panel ensures reliable performance in challenging environments.
5. Programmable and Energy Efficient: The LED button switch panel box kit is designed with programmable momentary buttons, perfect for horn or wiper applications, and boasts an ultra-low standby current, reducing energy consumption by up to 90% compared to previous models.

Specification:
Product model: SP5106
Panel size: 9.1×0.8×7.5cm/3.58×0.31×2.95in
Control box size: 16×9.5×3.2cm/6.3×3.74×1.26in
Packing size: 9.8×6.1×19.9cm/3.86×2.4×7.83in
Product net weight: 303g
Product gross weight: 344g
Product voltage: DC11-30V
Product current: 10A per branch circuit
Panel: PET film touch screen
Circuit protection: Built-in resettable fuse (PPTC)
Switching rating: 10A per branch
Panel rating: Maximum cumulative amplifier: 35A
Rated voltage: DC 11-30V
Protection: IP66 (film panel)
Power terminal: M4 stud size ring terminal
Loading terminal: .250 fast terminal (male)

Installation Notes:
1. Place the provided template on the desired panel position and cut the holes accordingly.
2. From the back of the dashboard, insert the micro USB plug to the front. Connect the micro USB plug to the socket on the back of the panel.
3. Install the panel firmly on the dashboard, and use self-adhesive on the back of the dashboard.
4. Install the control box correctly with the included screws.
Insert the other end of the micro USB cable into the control box. Insert the cable into the strain relief hook on the box.
5. Press the DC positive wire (+) tightly with the included round terminal. Pass wires through the included insulators and connect to screw terminals. Cover the terminals with insulators. Clamp the DC negative wire (-) with an insulated 0.250″ female terminal, and insert it into the negative quick terminal on the control box.
Connect the load terminal to the required equipment. The numbers on the top of the load terminals correspond to the numbers on the membrane contact 1 2 3 panel shown on the left.
6. (Momentary button setting) Set a specific button as momentary (press), press the button and the backlight button at the same time for more than 5 seconds, until the button flashes. All buttons can be set to be short-lived. To undo this action (change the button to on-off), simply repeat the process again on the same button.

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2mm measuring deviation due to manual measurement. 

1set x Car Boat LED Push Button Switch Panel