8.2:1 Gear Ratio Baitcasting Reel High Speed Ultralight Reel Max Drag 10kg Left/Right Hand Metal Water Drop Reel Brake System

Product Name: Max Drag 10kg Baitcasting Reel
Colour: As the pictures show
Size: As the Picture Shows
Material: Plastic/aluminum alloy
Applicable User: Fresh Saltwater
Speed ratio: 7.2:1
Number of bearings: 18+1
mm-#-m: 0.23mm/180m,0.28mm/150m,0.3mm/110m
The reason why the dripping reel fryes the line: The bait en-counters various resistances when flying in the air. The flying speed of the bait is lower than the rotation speed of the reel, causing the line to quickly accumulate on the reel, resulting in fried line fried noodles. For example: when the bait flies 40 meters in the air, the reel rotates 50 meters out, and more than 10 meters of fishing line quickly accumulates on the reel, forming fried line fried noodles.
How to prevent fried noodles from frying: First of all, don’t rush to throw when you get the wheel. First, adjust the drip wheel. First adjust the wheel’s magnetic adjustment knob to 910 to allow the wheel to have magnetic brakes, and then adjust the spindle of the wire wheel. Adjust the knob to control the rotation speed of the wire wheel. Please adjust as follows: install the drip wheel on the fishing rod, raise the lure rod to about 90 degrees from the ground, press the pay-off switch, and after the fake baits of different weights slowly fall to the ground, the reel stops rotating. It will reverse and it will not be easy to blow the line at this time. Does not affect exit speed and throwing distance. If you are a novice, it is recommended to adjust the reel spindle tighter during early practice so that it will not be easy to fry the thread.
Neat throwing posture: We understand the reason for frying the line and frying the powder. When we cast, our thumbs should gently rest on the outside of the reel, and we must control the rotation speed of the reel at any time, especially at the moment when the bait is about to enter the water. Be sure to hold down the reel with your thumb to stop unwinding, otherwise the thread will be messed up. If your thumb control is good, you will generally not mess up the lines, and the water drop wheel is very fun.
Handling after messy threads: If there is a slight mess, just slowly sort out the messy threads through the wire holes and then re-wrap them. When the threads are completely fried, we must open the side cover and take out the messy threads and the thread cup together. , organized and loaded, ready for use. (Be sure not to remove the rocker arm side)

Package includes:

1xBaitcasting Reel