Firduo Swordfish S40 Water Jet Manatee 100 ESC VX3 Remote Control Kit for SUP Surfboards Kayaks ROV AUV USV

Description

Firduo Swordfish S40 water jet

1. Comply with fluid design: large thrust, small resistance, low power consumption;

2. Voltage：10-14S（1S=3.6V-4.2V）;

3. Maximum power: 2.5KW, continuous power: 1.5KW;

4.Instantaneous current: 75A, continuous current: 30A;

5. Features:

① Equipped with a multi-functional installation module;Universal tail fin interface orDIY interface;

②360° large flow water inlet;

③Water cooling interface;

④High thrust propeller;

⑤ water jet propulsion;

⑥ High-strength all-aluminum alloy anode shell;

6. Equipped with fully waterproof motor .

7. Easy to install. For surfboards, paddle boards, kayaks, SUP…

8.Motor wire: 10＃silicone cable, 1100mm-Black, with 5.5mm gold connector plug

Thrust:

13S, 10A, 4.5KG;

13S, 20A, 6.5KG;

13S, 30A, 8.5KG;

Net weight:2.6KG

Tail fin versionPacking list:

① Swordfish S40 water jet* 1;

② 5.5mm gold connector(Female end)* 3;

③Tailfin interface * 1, bolt * 1, accessory * 1, additional accessory * 1;

④ M4 * 20 screw*6（Including additional * 3）

⑤ M2.5 wrench * 1; M4 wrench * 1;

⑥ Additional water-cooled joint * 1;

DIY versionPacking list:

① Swordfish S40 water jet* 1;

② 5.5mm gold connector(Female end)* 3;

③DIY interface * 1；

④ M4 * 20 screw*6（Including additional * 3）

⑤ M2.5 wrench * 1; M4 wrench * 1;

⑥ Additional water-cooled joint * 1;

VX3 Remote Control

Feature:

1.6-inch super clear and big screen display

Display shows more: Except for basic telemetry data, it also display GPS, motor power, real-time temperature of MOS tube, and throttle progress bar information

Be compatible with  VESC and Non-VESC

ESK8 mode / E-surf mode switching freely

Esurf mode：Cruise speed control function

Waterproof IP rating: IP67

Bigger remote battery capacity:1500MA

ESC failure report ：Detect possible failures of the ESC in time for replacing

Controller mode: PPM/UART

Charging way:Wireless Magnetic Charging

VX3 Remote comes with Receiver

Remarks: For remote VX3, it is recommended to wash it with fresh water or soak it in fresh water for at least one minute after using to reduce salt residue and extend the service life of the remote.

Manatee100  75V 100A VESC

Voltage: 75V maximum (recommended within 16S)

Current: 100A continuous, maximum 200A

Features:

1、Based on the design of vesc75300 hardware principle.

2、Using 6 mosfet  IRF7769L (100v 200A each).

3、Independent gate drive.

4、Independent power supply.

5、Independent current sampling.

6、Active filter circuit makes current sampling more accurate.

7、Rich onboard interface.

8、Independent two-way adc.

9、Support VESC TOOL official 75300 firmware.

10、The circuit is reasonable and stable.

Size: 80*80*31（Includes waterproof case）

Battery end plug: 3*XT90 male connector,10＃silicone cable, 120mm-Red/120mm-Black

Motor end: 10＃silicone cable, 120mm-Black, with plug

Terminal plug type: Gh1.25

Recommended waterproof batteries:

FIRDUO FD13S5P waterproof battery（Click to view）

Export quality: UN38.3/MSDS/shipping report and other certifications