NUTT Scooter Electric Brake Y-5 Hydraulic Disc Oil Brake 140 160 180 Rotor For A5-D Zero 10X 11X KUGOO G1 VSETT 10+ 9+ 9 ICE Q5

Description

*This link is not suitable for E-bike. If you have a bike, please check other links in the store

【Compatible Scooter】

Zero 10X / KUGOO G1 ;/ VSETT 10+ ;/ VSETT 9+ / VSETT 9 / ICE Q5 Evolution ;

If your model is not available above, please send a photo of your scooter or model to our customer service, and we will customize the appropriate brake for you at the same price. ( This link is not applicable to scooters with both of front and rear brakes on the left side, If you need to install on the left side of scooter, please contact customer service）

If you are unsure how to choose a suitable kit, pleae contact us and we will help you choose the appropriate one;

【Brand】: NUTT(Taiwan)

【Name】：4-piston Electric Hydraulic Disc Brake

【Material】：Aluminum alloy

【Model】：NUTT Y-5

【Weight】：Please check the actual photo at the bottom

【Piston】：4-piston

【Adapter】：F160-R140 / F180-R160 / F203-R180

【Oil pipe length】1.35m /2.2m

【Waterproof connector】2-pin JULET connector (male), 30cm length

【Main functions】

* When the brake lever is pressed, the electric bicycle or electric scooter is disconnected from the power supply and brakes at the same time, greatly improving the braking performance and increasing the safety of riding.

The following brake pads are original brake pads, which are included in the caliper. If you need replaceable brake pads, you can purchase cooling brake pads separately in this link

How to connect the brake lever? Please review the connection video below (note that during installation, please do not let the oil in the oil pipe leak as it is already filled with mineral oil)

【Attention】:

Do not remove the yellow protector and press the brake lever before installing the brake, as this will damage the brake. Please fully install it on the scooter before pressing the brake lever for testing

The brake has been filled with oil, so it is not necessary to fill it for the first installation. Please connect the brake lever in the order shown in the video, and be careful not to let the oil flow out when connecting

③ The original brake pads are already installed in the caliper, so there is no need to install the brake pads when using it for the first time. If you want spare brake pads, you can purchase them additionally.

The oil pipe of the front brake extends from the left side of the caliper, and the oil pipe of the rear brake extends from the right side of the caliper, and Calipers are symmetrical and opposite in direction, all installed on the right side of the scooter