TENS Machine Low Frequency Therapy Device Muscle Stimulator Physiotherapy Microcurrent Massager Pain Relief Health Care

Do you suffer with pain,muscle fension,stress or poor circulation?

This device can quickly relax tense muscle and relieve pain,It is a modem day home therapy device using the latest bio-electrical

technology.lt is designed to provide relaxingdeep smoothing sensations in areas where you need reliefRelaxfeel good and rejuvenate your body and soul,Don't live with unhealthy physical and mental tension anymore.

Features

* 2 output with 24 modes,4pads on the body at the same time

*20 level intensity,backlit LCD display

*20 minutes default timer, can adjustable from 10-60 minutes

*Rechargeable,large capacity lithium battery

Operating instructions

1. Make sure the unit is switched off.

2. Unit may need to be charged for ups to 3 hours for first use

3. Connect the pads to the wire by snapping them on, then remove

the protective film.

Note: adding a few drops of water on the pads will increase their

longevity.

4.Place pads where the massage sensations are desired. And plug into one of the ports on the device.For additional relief use the second port and repeat procedure to put on another two pads.Make sure both pads on the skin and not overlapping. Make sure your skin is free from any dirt, oil or lotion.

5. Turn the device on by sliding the on/ off switch on the top of the unit. The unit will be now activated.

6. Press the M button to try different mode.

Remember the strength will default to the lowest setting by each mode selection.

Note:First button is used a lock,which can be applied to lock the screen or unlock the screen.

7.Once you select a mode, gradually increase the intensity by pressing the“+”button decrease it by pressing“-"button.

Note: Press the "+" or "-" key on the left to correspond to the intensity of output channel A, and press "+" or "-" on the right to

correspond to the intensity of output channel B.

8.Recommended application is 10-60 minutes. Increase 10 minutes by each setting. The time remaining is automatically counted down. Then the unit will automatically turn off after time finish.