Ulralarge-Waterproof and Windproof Camping Tent, Double Layers, Large Space Gazebo, Family Party,1Hall, 2 Bedrooms, 6-12 Persons

Description

Size: Length 460 (230+230)cm* width 305cm* height 210cm
Weight: 18 kg
Outer account: Silver-coated 210D Oxford cloth PU waterproof coating F/R flame retardant, water pressure resistance greater than 2000mm, PU waterproof rubber strip heat sealing at the seam of the entire outer account, which can prevent rainwater from infiltrating from the seam and anti-ultraviolet Standard: UV50+
Inner tent: 150D Oxford cloth pu waterproof coating cloth, and lightweight fine mesh yarn
Bottom tent: Upgraded 150g wear-resistant PE bottom / waterproof 3000mm+
Struts: 6 high-strength 16mm painted steel pipes, 4 fiberglass rods, 1 pair of front door rods
Accessories: wind rope, full set of ground ding
Outsourcing: 210D waterproof coating shoulder bag.(70*30*30cm)
color: green

Product features: Two-bedroom, one-hall, double-layer rainstorm-proof six-person tent for atmospheric group field activities. The curtain in the bedroom forms the hall on the two sides of the room. . The outer tent can be removed. The inner tent can be used alone. There are windows on both sides of the front and rear doors. It is convenient for access and ventilation. This multi-person outdoor camping design can accommodate 4-12 people for team activities.

Product Assembly List:
Outer tent *1 piece + inner tent *1 piece + tent main pole *1 set + 21 ground nails + ground nail bag *1 + pole bag *1 + wind rope *6 + outer bag *1 + manual

The whole physical map:
Outer account display: all-inclusive large outer account, anti-rainstorm function, silver-coated inner layer of outer account, anti-ultraviolet

Inner account display: two rooms and one hall design, the bedroom space is divided into two single rooms, each 230*150CM room is provided, and the size of the hall is: 230*300CM

Tent setup:

1: Insert the long 2 fiber rods into the cross tube sleeve on the top of the tent, and insert the rod head into the plastic tee on the 4 feet. The short 2 fiber rods are inserted into the middle tube sleeve and into the middle plastic tee. Insert 2 reinforced steel rods on the side Insert into the tee on both sides Complete the top
2: Lift the top of the tent, put in the steel poles at the four corners of the tent, insert the upper part of the steel tube into the socket of the plastic tee, and insert the lower part of the steel tube into the nails on the metal ring of the bottom of the tent. Then put in the two steel poles in the middle of the tent. The hooks that hang the edges are fastened to the steel pipes. Tighten the tent feet, insert the ground to stabilize the tent, and the inner tent is completed.
3: Put on the outer tent, hang the hook, pull up the wind rope, tie the ground, and the tent is completed.