Ultralarge 2sleeping Rooms 1hall Camping Tent 6-12Persons Double Layers Waterproof Windproof Outdoor Party Family Tourist Gazebo

Description

Ultralarge 2sleeping Rooms 1hall Camping Tent 6-12Persons Double Layers Waterproof Windproof Outdoor Party Family Tourist Gazebo

Description:
Product size: Length 460 (230+230)cm* width 305cm* height 210cm/181*120*82in
Outer account: 210D oxford silver coated waterproof PU3000mm,F/R flame retardant,the seams have strip,UV50+
Inner tent: 150D Oxford PU 3000mm fabric+high density mesh
Bottom tent: Upgraded 150g wear-resistant PE waterproof 3000mm+
Struts: 6 high-strength 16mm painted steel pipes, 4 fiberglass rods, 1 pair of front door rods
Accessories: wind rope, full set of ground ding
Pack size:70*30*30cm/28*12*12in
Weight:about 19kgs/42lbs

Packing list:
1*outside shell
1*inner tent
6*steel pipes
4*fiber glass poles
2*front door support poles
1*storage bag
nails,ropes.

Features:
Product features: Two-bedroom, one-hall, double-layer rainstorm-proof six-person tent for atmospheric group field activities. The curtain in the bedroom forms the hall on the two sides of the room. . The outer tent can be removed. The inner tent can be used alone. There are windows on both sides of the front and rear doors. It is convenient for access and ventilation. This multi-person outdoor camping design can accommodate 6-12 people for team activities.

Tent setup:
1: Insert the long 2 fiber rods into the cross tube sleeve on the top of the tent, and insert the rod head into the plastic tee on the 4 feet. The short 2 fiber rods are inserted into the middle tube sleeve and into the middle plastic tee. Insert 2 reinforced steel rods on the side Insert into the tee on both sides Complete the top
2: Lift the top of the tent, put in the steel poles at the four corners of the tent, insert the upper part of the steel tube into the socket of the plastic tee, and insert the lower part of the steel tube into the nails on the metal ring of the bottom of the tent. Then put in the two steel poles in the middle of the tent. The hooks that hang the edges are fastened to the steel pipes. Tighten the tent feet, insert the ground to stabilize the tent, and the inner tent is completed.
3: Put on the outer tent, hang the hook, pull up the wind rope, tie the ground, and the tent is completed.